Get a quote
[ PAINT & REFINISHING ]

Leather Restoration & Repair in Dubai

Restore cracked, faded or damaged leather with premium dyes and coatings

Pick-up and recovery available on request.

Red leather seat being dried after re-dyeing
[ OVERVIEW ]

Almost all automotive leather — real or synthetic — is a finished leather: the colour you see is a pigmented layer on top of the hide, sealed with a clear topcoat. Alcantara and brushed or suede-finished materials are the exception. That finish is what wears through on bolsters and steering wheels, and it is exactly what can be rebuilt: clean, repair the substrate, re-pigment, seal. Heat and UV in Dubai make this a common job, not a rare one.

Leather that is cleaned and protected regularly lasts much longer. Once cracks appear, they grow with heat and use. Restoration stops that process and brings back the look of the interior — often at a fraction of the effort of replacing the covers. We also explain simple care steps to keep the result.

What’s included

  • Deep cleaning and degreasing
  • Crack, scuff and bolster-wear repair with leather-specific fillers
  • Colour matched and applied with leather paint, then sealed
  • Topcoat in the original sheen: matte, satin or gloss
  • Steering wheel refinishing, including the worn areas at 10 and 2 o’clock
  • Stitching protected with 1 mm masking tape so the original thread colour is preserved
  • Dashboards, door cards, armrests and gear knobs
  • Colour change of seats and trims (scope agreed per car)
[ TECHNICAL NOTES ]

What we are actually repairing

On a finished leather the layers are, from the hide upwards: the leather itself, a flexible base/filler coat, a pigmented colour layer, and a clear topcoat that sets the sheen and takes the wear. When a bolster looks “cracked”, what has usually failed is that finish — not the hide.

So the repair rebuilds the same stack. The area is cleaned and degreased, the damaged finish is removed, cracks and lost material are filled with flexible leather fillers (not body filler — they have to move with the hide), the surface is levelled, and the colour is applied as a leather paint matched to the original, then sealed with a topcoat in the correct sheen. Done properly the panel flexes with the seat instead of cracking again along the repair.

Steering wheels. The same method, and one of the most requested jobs: the wear is concentrated where the hands sit, so it is refinished and re-sealed rather than retrimmed — as long as the leather itself is not torn through.

Stitching. Contrast stitching is part of the design, and painting over it ruins the look. We mask the seams with 1 mm tape, line by line, so the thread keeps its original colour and the repair does not read as a repaint.

Alcantara and suede. These are not painted. They are cleaned and, where the pile is worn or flattened, we discuss re-covering options.

[ PROCESS ]

Our process

  1. STEP 01 / 05

    Clean

    Deep clean and degrease; assess hide and finish.

  2. STEP 02 / 05

    Repair

    Flexible leather filler, levelled and sanded.

  3. STEP 03 / 05

    Mask

    Stitching taped, 1 mm, line by line.

  4. STEP 04 / 05

    Colour

    Leather paint matched and applied in thin coats.

  5. STEP 05 / 05

    Seal

    Topcoat in the original sheen, then cure.

[ WHY BELLA MOTOR ]

How we work on it

Sport, high-end and collector cars — and everyday cars that deserve the same care.

[ GALLERY ]

From the workshop

[ FAQ ]

Questions

Can torn leather be repaired?

Small tears and cuts can be repaired. For larger damage, upholstery options are available and can be discussed.

Can you refinish a steering wheel?

Yes — it is one of the most common jobs we do. The worn areas are rebuilt, re-coloured and sealed. If the leather itself is torn through or the wheel has been over-sanded before, we will tell you that re-covering is the better option.

Will the stitching still look original?

Yes. The seams are masked with 1 mm tape before the colour goes on, so the thread keeps its own colour.

Will the colour rub off?

The dye is sealed with a protective topcoat, which makes it durable with normal care.

How long does it take?

Usually two to three days, depending on the number of seats.

[ BOOK ]

Send photos of the seats on WhatsApp.

[ RELATED ]

Related services

Call