Car Polishing & Detailing in Dubai
Interior & exterior polishing, including engine bay to restore showroom shine
Pick-up and recovery available on request.
Dubai sun, dust and brush car washes leave swirls, water spots and dull paint. Detailing restores the finish in steps: wash and decontaminate, correct the paint with machine polishing, then clean and protect the interior and the engine bay. Each step is inspected under light, so you can see what changed.
Paint correction removes material, so it must be done with care. We check the paint thickness where needed and choose the least aggressive step that gives the result. This keeps enough clear coat on the car for the future, and gives a finish that stays sharp when combined with the right protection.
What’s included
- Pre-wash, snow foam and hand wash
- Paint decontamination; clay where required
- Multi-step machine polishing: cutting, refining and finishing passes
- Wet and dry sanding for deeper scratches and correction work (quoted separately — see below)
- Interior detailing: leather, plastics, glass, fabric spot cleaning
- Engine bay surface clean
- Wheels and tyres
- Optional protection: ceramic coating (see Ceramic coating)
How a polish is actually built up
Paint correction is a sequence of decreasing abrasives. Each step removes the marks left by the step before it, and each step uses its own pad and its own product — that combination is what separates a corrected panel from a temporarily glossy one.
Cutting pass. Firm pad, coarse compound, controlled speed and pressure. This is the step that actually removes defects.
Refining pass. Softer pad, finer compound. Removes the haze and the micro-marring left by cutting.
Finishing pass. Soft finishing pad and a fine polish, to bring out gloss and depth in the clear coat.
Sanding — only when needed. Deeper scratches, orange peel and runs do not come out with a pad. They are flattened first by hand: dry sanding to level, then wet sanding with progressively finer grades, and only then the cutting, refining and finishing passes. Sanding removes clear coat, so it is done with a thickness gauge in hand, and it is not part of a standard polishing package — depending on the depth of the scratch it may be quoted separately, or it may not be possible at all without repainting the panel.
Every step is checked under inspection light before moving on, and we measure paint thickness first: there is only so much clear coat on a car, and it is not renewable.
Our process
- STEP 01 / 05
Wash
Pre-wash, snow foam, hand wash, wheels.
- STEP 02 / 05
Decontaminate
Chemical decontamination and clay where required.
- STEP 03 / 05
Correct
Cutting, refining and finishing passes — with sanding first where the defect requires it.
- STEP 04 / 05
Protect
Optional sealant or ceramic coating.
- STEP 05 / 05
Inspect
Panel by panel under inspection light, with the customer where possible.
How we work on it
Sport, high-end and collector cars — and everyday cars that deserve the same care.
- Each step inspected under light
- Paint thickness measured before any correction
- A pad and a product for every step, not one polish for everything
From the workshop








Questions
Will polishing remove all scratches?
Polishing reduces swirls and light scratches in the clear coat. Deeper scratches need sanding before polishing, which is quoted separately, and anything that has gone through the clear coat needs paint repair. We measure and tell you which case you are in before starting.
How often should I polish my car?
Paint correction removes a thin layer of clear coat, so it should not be done often. After correction, a coating and correct washing keep the finish longer.
Is engine bay cleaning safe?
Yes. We protect electrical components and clean the surfaces without high-pressure water on sensitive parts.
Book a paint inspection on WhatsApp.
Related services
Brands we work onPorsche →Ferrari →Rolls-Royce →Bentley →Mercedes-Benz →Lamborghini →All brands →
