Painting & Body Works in Dubai
Body repair and full or partial resprays — done to last, with factory colour matching
Pick-up and recovery available on request.
Paint is the part of a repair everyone can see, and the part where shortcuts show up months later. Our approach is simple: the bodywork is straightened and sanded back properly — down to bare metal where the damage requires it — with as little filler as possible, the materials are the ones we would use on our own cars, and the panel is built back up in the correct steps. Most of our customers come back for a second and a third car, which is the only real test of paintwork.
Most visible defects in paintwork come from shortcuts in preparation: filling a dent instead of straightening it, masking instead of removing parts, cheap thinners, or rushing the flash-off and curing times. Doing each step properly takes longer, but it is what makes the finish look right at close range, in sunlight and under inspection lights — and still look right in two years.
What’s included
- Accident and panel repair: straightening, welding and brazing, panel replacement
- Dent removal by hand — slide hammer, hammer and dolly, shrinking — before any filler
- Removal of trims, lights and handles where required — not masked over
- Primer, base coat and clear coat system
- Factory colour-code matching with spray-out test panels
- Colour changes, including door shuts and visible openings (scope agreed per car)
- Cut and polish after curing
- Paint thickness measured before and after
- Painting to factory thickness on request — see Thickness Specs Painting
See alsoThickness Specs Painting →Smart Paint →PDR (Paintless Dent Repair) →
Why preparation and materials decide the result
Metalwork first, filler last. A dent that is pulled, hammered and shrunk back to shape needs a skim of filler; a dent that is simply filled needs a lot of it. Thick filler is what cracks, shrinks and shows an outline two summers later. We sand back — to bare metal where the damage requires it — straighten the panel properly, and keep the filler layer as thin as the repair allows.
Materials are not interchangeable. The visible faults in cheap paintwork usually come from the cheapest item in the system, the thinner. A thinner that is too fast or wrong for the temperature traps solvent under the surface: the film keeps shrinking after it looks dry, so the finish turns rough or dull within weeks, and you get solvent pop — small craters where trapped solvent forces its way out of the clear coat. In a workshop that regularly works at 40 °C+ ambient, the thinner and hardener have to be matched to the conditions of the day, not to the price list.
Steps, in order, with the right flash-off. Degrease, prime, block sand, sealer, base coat, clear coat, cure, then cut and polish. Each step has a waiting time. Skipping flash-off time is invisible on handover day and obvious a year later.
Colour. Matched to the factory code, then checked with spray-out panels against the car in different light — because age, sun and previous repairs move a colour away from its code.
Thickness. Measured before and after. If you want the repair kept within factory thickness values — which matters for resale and for inspection — that is a specific way of working, and it is on our Thickness Specs Painting page.
Our process
- STEP 01 / 05
Assess
Damage, paint condition and thickness readings.
- STEP 02 / 05
Body work
Straightening, welding or panel replacement; minimum filler.
- STEP 03 / 05
Prepare
Disassembly, sanding to bare metal where required, primer, block sanding.
- STEP 04 / 05
Paint
Base and clear coat applied in our paint booth, with materials matched to the conditions.
- STEP 05 / 05
Finish
Cure, cut, polish, reassemble, inspect.
How we work on it
Sport, high-end and collector cars — and everyday cars that deserve the same care.
- Metal straightened first, filler kept to a minimum
- Materials chosen for a 40 °C workshop, not for the invoice
- Colour checked with test panels before the car is painted
- Thickness measured before and after
From the workshop












Questions
How long does a full respray take?
It depends on the bodywork and the level of disassembly. We give you a timeline after inspection.
Can you change the colour of my car?
Yes. We agree the scope first — exterior only, or including door shuts, engine bay and boot openings. In the UAE a change of colour must also be updated on the vehicle registration.
Will the new paint match the original?
We mix to the factory colour code and compare spray-out panels on the car before painting.
Send photos of your car on WhatsApp for an assessment.
Related services
Brands we work onPorsche →Ferrari →Mercedes-Benz →BMW →Lamborghini →Rolls-Royce →All brands →
