Engine & Gearbox Diagnostics in Dubai
Professional diagnosis for engine, gearbox, and performance issues
Pick-up and recovery available on request.
A warning light, a jerky gear change or a loss of power can have several causes. Replacing parts until the fault disappears is expensive and often doesn’t work. We diagnose first: read the fault codes, analyse live data, test the components and confirm the root cause before proposing a repair. You get a clear explanation of the fault and the options to fix it.
Modern engines and gearboxes are controlled by software and sensors, so the same symptom can come from a mechanical part, a wiring fault or a control unit. A structured diagnosis narrows the possibilities step by step and backs every conclusion with a reading or a test. That is how an engineer approaches a fault, and it is how we approach yours.
What’s included
- Full-system fault-code scan and live-data analysis
- Misfire, power loss, rough idle and overheating
- Automatic, dual-clutch and manual gearbox symptoms: slipping, harsh or delayed shifts
- Oil and coolant leak tracing
- Check-engine and gearbox warning lights
- Road test with data logging where required
- Findings explained, with repair options
Our process
- STEP 01 / 04
Listen
When does the fault happen, and what changed?
- STEP 02 / 04
Test
Scan, live data, component tests, road test.
- STEP 03 / 04
Confirm
Root cause identified before any part is ordered.
- STEP 04 / 04
Explain
Findings and options; repair once you approve.
How we work on it
Sport, high-end and collector cars — and everyday cars that deserve the same care.
- Engineer-led method: hypothesis, test, confirm
- No parts replaced before the cause is confirmed
- A clear explanation you can understand
From the workshop
Questions
My check-engine light is on but the car drives fine. Should I worry?
The light means the engine control unit has stored a fault. Some faults are minor; others get worse and cause further damage. A scan tells us which one it is.
Can you diagnose a gearbox without opening it?
In most cases, yes. Fault codes, adaptation values, fluid condition and a road test usually point to the cause before anything is dismantled.
Do you also carry out the repair?
Yes. Once you approve the scope, we carry out the repair in our workshop.